← Our Services / Portable Fire Fighting Equipment
Fire Extinguishers
Supply, siting and annual servicing of portable fire extinguishers, matched to the fire risks present in your building. Based in Stockport, covering Greater Manchester, Cheshire and the Peak District, with sites across the UK.
The right extinguisher, in the right place, serviced on time. We select equipment against the fire classes present on site: A (solids), B (flammable liquids), C (gases), Electrical, and F (cooking oils/fats).
Positioning follows BS 5306‑3's siting rules — travel distance, mounting height, and visibility — and every extinguisher is serviced annually by a competent engineer, with a record kept for your compliance file.
We're based in Stockport and service fire extinguishers across Greater Manchester, Cheshire and the Peak District, with cover further afield across the UK where needed.
BS 5306‑3:2017
Annual servicing by a competent person is the BS 5306-3 recommendation for portable fire extinguishers — we keep a record of every service against your building for your compliance file.
What's Included
Scope of work.
- Fire risk-matched extinguisher selection (water, foam, CO2, dry powder, wet chemical)
- Supply & wall-mounting to BS 5306-3 positioning rules
- Annual servicing & certification
- Signage
- Replacement of expired, discharged or damaged units
Common Questions
Extinguisher FAQs.
-
What areas do you cover for fire extinguisher servicing?
We're based in Stockport and service fire extinguishers across Greater Manchester, Cheshire and the Peak District, with cover further afield across the UK where needed.
-
How often do fire extinguishers need to be serviced?
BS 5306‑3 recommends annual servicing by a competent person, alongside a basic visual check you can do in-house between visits. We keep a full service record against your building for your compliance file.
-
How do you decide which type of extinguisher I need?
We assess the fire classes actually present on site — A (solids), B (flammable liquids), C (gases), electrical, and F (cooking oils/fats) — and select and site extinguishers to match, rather than taking a one-size-fits-all approach.
-
What happens when an extinguisher is due to expire or has been discharged?
We flag any extinguisher that's due to expire, has been discharged, or fails inspection, and replace it as part of the same visit so your cover isn't left with a gap.
Other Specialisms
The rest of the picture.
Fire and security systems rarely stop at one discipline — here's everything else we cover.
Fire Alarms
Design, installation, commissioning and maintenance of fire detection and alarm systems, specified to the layout and use of your building.
Fire Alarms →
Emergency Lighting
Emergency lighting that works when the power doesn't — designed, installed and tested to BS 5266‑1, so escape routes stay lit and exits stay visible.
Emergency Lighting →
CCTV
Camera systems specified to suit the site, with remote viewing options — from a single entrance camera to a fully networked, monitored setup.
CCTV →
Intruder Alarms
Detection and alarm systems protecting premises against unauthorised access — from single-zone setups for smaller units to multi-zone systems across larger sites.
Intruder Alarms →
Drawing Design
Zone plans, system schematics and as-wired drawings for new and existing systems — available as a standalone service for systems that need documentation brought up to date.
Drawing Design →
Access Control
Card, fob and keypad access control systems, specified to release safely on activation of your fire detection system.
Access Control →
Sprinkler Monitoring
Electrical monitoring and alarm interfacing for wet and dry sprinkler installations — flow, tamper and pressure switches wired into your fire detection panel, so a sprinkler activation is never a silent event.
Sprinkler Monitoring →Need fire extinguishers?
Tell us about the site and what you need — we'll get back to you with a straight answer.